# Observations 07/05/2020; Rugel
# firmware specpol: ok -  bb1 (shift by 25 upper plot), bb2 (shift by 25 upper plot)
# receiver loading: ok (no problems)
# check on scan 5259: specpol chan dispersion correction: ok; power 7 GHz: seemed fine
# start 7.5.2020, 16:42; end 7.5.2020, 17:31
# for pointing/focus used FeBe S45mm-SPECPOL, BE Section 05 (BB-02 7000M FEED-01 X), 6600-6730 MHz
# note: project name: TEST
##########################
5253	3C196			Pointing	# Col*=0.8" NulE=5.4" el=72
5256	3C196			Focus		# zlin=0.8mm
5257	3C196			Pointing	# Col*=-0.7"  NulE=10.5" el=72
5258	3C138			L-Pointing	# Col*=1.0"  NulE=20.3" el=53
5259	3C138			Calmap		# 
5260    W3OH                    Pointing        # Col*=4.4   NulE=7.2 el=52
5261    W3OH                    ONOFF           # ok

# Observations 08/05/2020; Rugel
# firmware specpol: ok -  bb1 (shift by 25 upper plot), bb2 (shift by 25 upper plot) (from 7.5.2020)
# receiver loading: ok (at second attempt - restart fw,control,specpol)
# check on scan 5259: specpol chan dispersion correction: ok; power 7 GHz: seemed fine; checked also W3OH on 7.5.2020 - ok
# start 8.5.2020, 00:36; end 8.5.2020, 00:51
# for pointing/focus used FeBe S45mm-SPECPOL, BE Section 05 (BB-02 7000M FEED-01 X), 6600-6730 MHz
##########################
5363	3C286			Pointing	# Col*=-1.7" NulE=7.6" el=68
5364	3C286			Focus		# zlin=-2.6mm
5365	3C286			Pointing	# Col*=-0.9"  NulE=7.1" el=68
5366	3C286			Calmap		# (used scanvelocity 90",scanspacing 30")
5367    NGC7027                 Pointing	# Col*=-4.7"  NulE=-8.3" el=28
5368    NGC7027                 L-Pointing	# Col*=-6.6"  NulE=-7.8" el=28
5369	GLO_LON_51.00_0.10	OTF		# el=26-40
5370	NRAO530                 Pointing	# Col*=-3.9"  NulE=-9.3" el=24
5371	GLO_LAT_1.95_0.00       OTF		# el=8.5-11.7
5372	GLO_LAT_-0.25_0.00	OTF		# el=8.6-12.3