#Observation 01-02/08/2021
#firmware special: band1: -3, band2:21
#receiver loading; s45mm; ***2phase; ok
#check on scan: specpol chan dispersion correction - ok for both bands
#start 01.08.2020, 21:00 - end 02.08.2020, 7:30
# strong attenuation in SPECPOL bb2; spikes but data fine
#######setup steps#################
# 5720 3C286 Pointing col*=-0.4 NulE=-8.5
# 5721 3C286 focus z=-2.2mm
# 5722 3C286 Pointing col*=-2.9 NulE=-6.4
# 5723 3C286 L-pointing col*=-3.5 NulE=-7.6
# 5724 2013+37 Pointing col*=-0.6 NulE=-0.8
# 5725 GLO_LON_78.50_-0.85 OTF
# 5726 NRAO530 Pointing col*=-6.1 NulE=-6.7
# 5727 GLO_LON_-0.95_-0.55 OTF
# 5728 NRAO530 Pointing col*=-10.5 NulE=-10.6
# 5729 GLO_LAT_19.00_0.00 OTF
# 5730 GLO_LAT_20.20_0.00 OTF
# 5731 1741-038 Pointing col*=-3.0 NulE=-12.9
# 5732 GLO_LAT_32.40_0.00 OTF
# 5733 GLO_LON_37.00_-1.00 OTF
# 5734 1923+210 Pointing col*=-3.0 NulE=-9.3
# 5735 GLO_LON_57.00_0.40 OTF
# 5736 GLO_LON_57.00_0.60 OTF
# 5737 NGC7027 Pointing col*=-0.9 NulE=-10.5
# 5738 NGC7027 focus z=-2.0
# 5739 NGC7027 Pointing col*=-0.6 NulE=-9.2
# 5740 NGC7027 L-Pointing col*=-2.9 NulE=-9.4
# 5741 GLO_LON_78.50_-0.45 OTF
# 5742 W3OH Pointing col*=-2.4 NulE=-2.1
# 5743 W3OH Onoff Shape OK
# Observations 05/08/2021; Rugel
# firmware specpol: using automatic setup in obsinp (attenuation 0.5); delay 21,18
# receiver loading: ok
# note: strong RFI: relatively new spike at 6600 MHz (~months). There is a strong spike at 7000 MHz, and some other harmonics, which are only seen in the specpol.
# start 5.08.2021; start at 22:30; beginning technical problems; effective start at 23:00; end 6.8.2021; 7:30
# for pointing/focus used FeBe S45mm-SPECPOL, BE Section 05 (BB-02 7000M FEED-01 X), 6600-6730 MHz
# strong attenuation in SPECPOL bb2; spikes but data fine
##########################
# RECEIVER SPECPOL GLOSTAR
5947 3C286 Pointing # aborted
5948 3C286 Pointing # Col*=2.0" NulE=-18.2" el=32deg
5949 3C286 Focus # zlin=-2.3mm
5950 3C286 Pointing # Col*=2.1" NulE=-19.9" el=32deg
5951 NRAO530 Pointing # Col*=-9.5" NulE=-22.0" el=25deg
5952 OFF_4.0_-4.0 ONOFF # ref: 4.0,-8.0 el=10deg # H2CO -0.2 K contamination@25km/s
5953 OFF_4.0_-3.0 ONOFF # ref: 4.0,-6.0 el=11deg # close to mountain
5954 OFF_8.0_-4.0 ONOFF # ref: 8.0,-8.0 el=13deg # clear
5955 OFF_12.0_-4.0 ONOFF # ref: 12.0,-8.0 el=16deg
5956 OFF_16.0_-4.0 ONOFF # ref: 16.0,-8.0 el=19deg
5957 NGC7027 Pointing # Col*=-1.5" NulE=-16.1" el=78deg
5958 NGC7027 L-Pointing # Col*=-0.8" NulE=-16.4" el=78deg
5959 NRAO530 Pointing # Col*=-4.3" NulE=-22.1" el=16deg
5960 GLO_LON_21.00_1.00 OTF # el=15-24deg
5961 1749+096 Pointing # Col*=-2.8" NulE=-21.7" el=27deg
5962 GLO_LON_37.00_-0.80 OTF # el=21-33deg
5963 1923+210 Pointing # Col*=-5.4" NulE=-26.5" el=39deg
5964 GLO_LON_57.00_-0.40 OTF # el=29-41deg
5965 2013+37 Pointing # Col*=-2.3" NulE=-25.1" el=45deg
5966 GLO_LON_78.50_-0.35 OTF # el=40-49deg
5967 GLO_LON_78.50_1.55 OTF # el=33-41deg
5968 GLO_LON_78.50_1.95 OTF # el=27-35deg
5969 GLO_LON_81.50_1.85 OTF # ABORTED el=26-32deg
# Observations 6/08/2021; Rugel
# firmware specpol: using automatic setup in obsinp (attenuation 0.5); delay 21,22
# receiver loading: ok
# note: strong RFI
# start 6.08.2021; 19:00 - end 7.8.21, 6:15
# for pointing/focus used FeBe S45mm-SPECPOL, BE Section 05 (BB-02 7000M FEED-01 X), 6600-6730 MHz
# strong attenuation in SPECPOL bb2; spikes but data fine
##########################
# RECEIVER SPECPOL GLOSTAR
5996 3C286 Pointing # Col*=-6.6" NulE=-20.5" el=66deg
5997 3C286 Focus # zlin=-1.1mm
5998 3C286 Pointing # Col*=-3.5" NulE=-25.5" el=65deg
5999 3C286 L-Pointing # Col*=-5.0" NulE=-20.8" el=65deg
6000 3C286 Calmap # Cal3C286v2: 90"/sec; 30" spacing
6001 NGC7027 Pointing # Col*=5.5" NulE=-19.6" el=31deg
6002 NGC7027 L-Pointing # Col*=5.2" NulE=-21.1" el=31deg
6003 1741-038 Pointing # Col*=1.8" NulE=-17.9" el=28deg
6005 W3OH Pointing # Col*=-2.1" NulE=-16.6" el=23deg
6006 W3OH ONOFF # el=23deg
6007 NRAO530 Pointing # Col*=-6.6" NulE=-27.4" el=23deg
6008 GLO_LON_21.00_-1.00 OTF # el=18-26deg
6009 OFF_4.0_-3.0 ONOFF # REF: 4.0d, -3.0d, el=10; clear
6010 OFF_16.0_-3.0 ONOFF # REF: 16.0d, -8.0d, el=20; clear
6011 GLO_LAT_6.05_0.00 OTF # el=15-16deg
6012 OFF_12.0_4.0 ONOFF # REF: 12.0d, 8.0d, el=23; clear
6013 NRAO530 Pointing # Col*=-8.7" NulE=-27.6" el=24deg
6014 GLO_LAT_6.15_0.00 OTF # el=13-15deg
6015 GLO_LAT_9.95_0.00 OTF # ABORTED (reference too low)
6016 GLO_LAT_19.20_0.00 OTF # el=20-26deg
6018 1749+096 Pointing # Col*=-5.8" NulE=-28.9" el=34deg
6019 GLO_LON_37.00_-0.60 OTF # el=28-38deg
6020 GLO_LON_37.00_-0.40 OTF # el=17-29deg
6021 1923+210 Pointing # Col*=-5.9" NulE=-31.1" el=deg
6022 OFF_54.0_-4.0 ONOFF # REF: 54.0, -8.0; clear
6023 GLO_LON_57.00_-0.80 OTF # el=22-35deg
6024 GLO_LON_81.50_1.85 OTF # el=37-45deg
# Observations by Rohit
# From 09.08.2021 23:00 to 10.08.2021 06:00
# firmware specpol: using automatic setup in OBSINP (attenuation 0.5); delay 11 and 22
# wind ~ 3 m/s
# 6267-6270 scans had bad fit quality, operator tried to fix as I was asleep, but it was still there.
# So I aborted the scan, moved the lines in spectroscopy tab and did a new pointing, and then the fit was good again.
# Last two scans (6274,6275) may have been aborted by the operator due to time running out
# strong attenuation in SPECPOL bb2; spikes but data fine
##########################
6256 3C286 Pointing # el=28 Col*=-0.7" NulE=-10.1"
6257 3C286 Focus # zlin=-3.0
6258 3C286 Pointing # el=28 Col*=-1.2" NulE=-12.0"
6259 3C286 Calmap # el=27
6260 NRAO530 Pointing # el=22 Col*=-10.5" NulE=-10.1"
6261 GLO_LAT_11.95_0.00 OTF # el=19-18
6262 GLO_LAT_14.05_0.00 OTF # el=19-17
6263 1749+096 Pointing # el=36 Col*=-6.9" NulE=-9.3"
6264 GLO_LON_37.00_-0.20 OTF # el=38-32
6265 1923+210 Pointing # el=48 Col*=-4.2" NulE=-10.6"
6266 GLO_LAT_52.20_0.00 OTF # el=34-46
6267 K3-50A Pointing # el=50 Col*=-4.2" NulE=-10.6"
6268 K3-50A Pointing # el=49 Col*=-24.9" NulE=20.1"
6269 K3-50A Pointing # el=49 Col*=-19.8" NulE=14.9"
6270 GLO_LON_81.50_1.95 OTF # el=34-46 aborted due to bad fit quality
6271 2013+37 Pointing # el=48 Col*=-1.1" NulE=-7.1"
6272 GLO_LAT_78.50_0.50 OTF # el=50
6273 GLO_LAT_80.80_0.50 OTF # el=45
6274 NGC7027 Pointing # el= Col*=" NulE="
6275 NGC7027 L-Pointing # el= Col*=" NulE="
#Observation 15-16/08/2021
#start 15.08.2021, 20:10 - end 16.08.2021, 06:14 CEST
#firmware special: band1: 11, band2: 22
#receiver loading; s45mm; ***2phase; ok
#check on scan: specpol chan dispersion correction - ok for both bands
#start 15.08.2021, 20:10 - end 16.08.2021, 06:14
#######setup steps#################
#1,startup: project code: 102-20; Directory: /home/obseff/ygong/
#2,specpol: 1, attenuation value 0.5; load special firmware False; restart** False
==>Attenuation has been set to 0.5;
# 2, attenuation value -1 ; load special firmware True; restart** False
# 3, ==>wait for the load firmware successfully and delay,
# 4, attenuation value -1 ; load special firmware False; restart** True
# 5, ==>wait for the mess: “Program has been restarted successfully”
###Notes: setup details: https://gongyan2444.github.io/specpol-setup.html
#3,Secondary: receiver: s45mm; version: cband_spec_plus_zooms_plus_polarimeter_2phases; freq:6GHz; load
#4, pointing; focus; pointing; Lpointing;
#5, observationClients: FeBe: s45mm-SPECPOL; BE section: 05 (BB-02 7000m FEED-01 X), zoom in the spectroscopy and press t to select the freq 6.7GHz; range: 6600-6730 MHz(avoid spikes);
#6, mapping 3c286: Mapping: @Cal3c286; new version: @Cal3C286v2
#7, mapping target: PSwitch; @mapnew/glo_lat_59.00_0.20
#8, at the end W3OH pointing; @W3OH_PSw;
#9, connect to 100m in using vac for mac:
https://gongyan2444.github.io/vncsetup.html
#10,
GC/(scripts: @GC/glo_lon_1.00_0.55)
scripts: @mapnew/glo_lon_41.00_-0.80)
Cygnus repeat: (scripts: @cygnus/glo_lon_81.50_0.85)
#11,
#######setup finish#################
#########################
### 6791 Temp:22; Winds=0.0m/s; col*=-4.8 ; NulE=23.5 ; Z = 1.0 ####
####TEST SCAN####
# 6792 3C286 pointing col*=-2.4 NulE=15.1
# 6793 3C286 pointing col*= -5.2 NulE=15
# 6794 3C286 pointing col*= -6.4 NulE=17
# 6795 3C286 focus Z = -1.7
# 6796 3C286 pointing col*=-6.8 NulE=17.9
# 6797 3C286 Lpointing col*=-6.9 NulE=17.8
# 6798 3C286@Cal3C286v2 Mapping
# 6799 NRAO530 pointing col*=-12.3 NulE=6.0
# 6800 @GC/glo_lat_2.05_0.00 Mapping
# 6801 @GC/glo_lat_2.15_0.00 Mapping
# 6802 @GC/glo_lat_2.25_0.00 Mapping
# 6803 @GC/glo_lat_6.25_0.00 Mapping #stop at scan 16 as the elevation is too low. (stop->start)
# 6804 NRAO530 pointing col*=-10.2 NulE= 9.7
# 6805 @GC/glo_lat_10.05_0.00 Mapping # at scan 17-20, elevation<14, turns yellow;
# 6806 @GC/glo_lat_15.95_0.00 Mapping
# 6807 NGC7027 pointing col*=2.0 NulE=18.8
# 6808 NGC7027 focus Z = -2.8
# 6809 NGC7027 pointing col*=2.1 NulE=16.6
# 6810 NGC7027 Lpointing col*=3.3 NulE=17.0
# 6811 1923+210 pointing col*=1.1 NulE=15.7
# 6812 @mapnew/glo_lon_57.00_0.80 Mapping
# 6813 @mapnew/glo_lon_57.00_1.00 Mapping
# 6814 1923+210 pointing col*=-2.3 NulE=9.1
# 6815 @mapnew/glo_lon_57.00_-1.00 Mapping #problem at subscan 8
#1,FitsWriter problem and restart computer in focus cabin
#2,then focus problem and redo pol/focus/pol.
#3,then as an add on the engines switched off automatically.
#take half hour to solve the above problem and go to glo_lon_57.00_-1.00.
# 6819 NGC7027 pointing col*= -2.3 NulE=9.1
# 6820 NGC7027 pointing col*= -1.3 NulE=-11
# 6821 NGC7027 focus Z = -3.0
# 6822 NGC7027 pointing col*=-2.9 NulE=-9.7
# 6823 @mapnew/glo_lon_57.00_-1.00 Mapping # stop it at subscan 14 as its elevation is too low < 22degree.
# 6824 2013+37 pointing col*=-1.1 NulE=-9.5
# 6825 @cygnus/glo_lon_81.50_1.95 Mapping
# 6826 W3OH pointing col*=-4.6 NulE= -7.8
# 6827 W3OH focus Z = -3.2
# 6828 W3OH pointing col*=-4.2 NulE=-7.5
# 6829 @W3OH_PSw ONOFF(PSwitch)
#Observation 30-31/08/2021
#firmware special: band1: 19, band2:-3
#receiver loading; s45mm; ***2phase; ok
#check on scan: specpol chan dispersion correction - ok for both bands
#start 30.08.2020, 17:00 - end 31.08.2020, 3:00
#######setup steps#################
8195 3C286 Pointing col*=2.0 NulE=13.0
8196 3C286 focus z=-1.3mm
8197 3C286 Pointing col*=4.1 NulE=13.6
8198 3C286 L-pointing col*=3.7 NulE=13.6
8199 3C286 CalMap
8200 1741-038 Pointing col*=-2.6 NulE=-0.2
8201 GLO_LON_37.00_-0.00 OTF
8202 NRAO530 Pointing col*=-3.6 NulE=-6.2
8203 GLO_LAT_14.25_0.00 OTF
8204 GLO_LAT_2.35_0.00 OTF
8205 GLO_LAT_2.45_0.00 OTF
8206 GLO_LAT_2.55_0.00 OTF
8207 NGC7027 Pointing col*=-1.0 NulE=-6.6
8208 NGC7027 focus z=-2.3mm
8209 NGC7027 pointing col*=-2.8 NulE=-4.4
8210 NGC7027 L-Pointing col*=-2.2 NulE=-4.4
8211 NRAO530 Pointing col*=-5.1 NulE=-1.8
8212 GLO_LAT_10.15_0.00 OTF
8213 GLO_LAT_14.35_0.00 OTF
8214 GLO_LON_21.00_0.80 OTF
8215 1749+096 Pointing col*=2.1 NulE=-5.9
8216 GLO_LON_37.00_0.20 OTF
8217 1923+210 Pointing col*=-0.1 NulE=-5.1
8218 GLO_LON_57.00_-1.00 OTF
8219 W3OH Pointing col*=-4.2 NulE=-1.7
8220 W3Oh Onoff Shape OK
#Observation 30-31/08/2021
#firmware special: band1: 19, band2:-3
#receiver loading; s45mm; ***2phase; ok
#check on scan: specpol chan dispersion correction - ok for both bands
#start 31.08.2020, 17:00 - end 01.09.2020, 3:00
#######setup steps#################
8276 3C286 Pointing col*=3.4 NulE=7.3
8277 3C286 Focus z=-0.7mm
8278 3C286 Pointing col*=6.4 NulE=6.2
8279 3C286 L-pointing col*=5.8 NulE=3.9
8280 3C286 CalMap
8281 1741-038 Pointing cal*=1.0 NulE=-3.8
8282 GLO_LON_37.00_0.40 OTF
8283 NRO530 Pointing cal*=-5.0 NulE=0.1
8284 GLO_LAT_14.45_0.00 OTF
8285 M17 OnOff
8286 GLO_LAT_2.65_0.00 OTF
8287 GLO_LAT_2.75_0.00 OTF
8288 NGC7027 Pointing cal*=-1.5 NulE=-9.6
8289 NGC7027 Focus z=-2.6
8290 NGC7027 Pointing cal*=-1.7 NulE=-8.6
8291 NGC7027 L-pointing cal*=-3.4 NulE=-8.2
8292 NRAO530 Pointing cal*=-6.1 NulE=-5.7
8293 GLO_LAT_10.25_0.00 OTF
8294 GLO_LAT_14.55_0.00 OTF
8295 GLO_LON_21.00_0.60 OTF
8296 1749+096 Pointing cal*=-1.1 NulE=-5.9
8297 GLO_LON_37.00_0.60 OTF
8298 1923+210 Pointing cal*=-0.5 NulE=-5.8
8299 GLO_LAT_52.40_0.00 OTF
8300 W3OH Pointing cal*=-3.0 NulE=-0.6
8301 W3OH OnOff Shape ok