# Observations 01/09/2022; Gong
# start 01/09/2022,22:00 - end 02/09/2022,03:00
# phase was not good at the beginning due to specpol setup. Restarting SPECPOL solves it.
# firmware specpol: using automatic setup in obsinp (attenuation 0.5); delay 23, 22
# receiver loading: ok
# note: checked specpol on scan 3016 with toolbox2 adjust/adjfit
# for pointing/focus used FeBe S45mm-SPECPOL, BE Section 05 (BB-02 7000M FEED-01 X), 6600-6730 MHz
##########################
3238 3C286 POINT # Col*=2.7" NulE=-3.7" el=23deg
3239 3C286 FOCUS # zlin=-2.0mm el=22deg
3240 3C286 POINT # Col*=3.9" NulE=-1.9" el=22deg
3241 3C286 CalMAP # calmapv2; el=22deg
3242 NRAO530 POINT # Col*=-10.6" NulE=1.3" el=19deg
3243 GLO_LAT_16.80_0.00 OTF # el=15deg
3244 1741-038 POINT # Col*=-2.6" NulE=-3.8" el=20deg
3245 GLO_LAT_24.00_0.00 OTF # el=16deg
3246 1923+210 Point # Col*=-4.9" NulE=-3.6" el=46deg
3247 GLO_LON_55.00_0.40 OTF # el=35deg
3248 GLO_LON_55.00_0.60 OTF # el=26deg
3249 NGC7027 POINT # Col*=-5.2" NulE=-3.4" el=55deg
3250 NGC7027 FOCUS # zlin=-1.9mm el=55deg
3251 NGC7027 POINT # Col*=-4.2" NulE=-3.5" el=55deg
3252 NGC7027 LPOINT # Col*=-4.6" NulE=-2.8" el=49deg
3253 W75NGAL Onoff # OK
# Observations 03/09/2022; Gong
# start 03/09/2022,19:15 - end 04/09/2022,03:00
# phase was not good at the beginning due to specpol setup. Restarting SPECPOL solves it.
# firmware specpol: using automatic setup in obsinp (attenuation 0.5); delay 21, -2
# receiver loading: ok
# note: checked specpol on scan 3329 with toolbox2 adjust/adjfit
# for pointing/focus used FeBe S45mm-SPECPOL, BE Section 05 (BB-02 7000M FEED-01 X), 6600-6730 MHz
##########################
3327 3C286 POINT # Col*=-3.1" NulE=-4.3" el=47deg
3328 3C286 FOCUS # zlin=-2.0mm el=47deg
3329 3C286 POINT # Col*=-4.9" NulE=-3.7" el=47deg
3330 3C286 CalMAP # calmapv2_lat; el=47deg
3331 NRAO530 POINT # Col*=-6.9" NulE=-9.9" el=26deg
3332 GLO_LON_9.00_-0.25 OTF # el=14deg
3333 GLO_LON_9.00_-0.15 OTF # el=15deg
3334 GLO_LON_9.00_-0.05 OTF # el=15deg
3335 GLO_LON_9.00_0.05 OTF # el=14deg
3336 GLO_LON_11.00_0.45 OTF # el=15deg
3337 NRAO530 POINT # Col*=-5.4" NulE=-3.0" el=18deg
3338 NRAO530 FOCUS # zlin=-2.4mm el=18deg
3339 NRAO530 POINT # Col*=-8.6" NulE=-11.4" el=18deg
3340 GLO_LAT_17.00_0.00 OTF # el=13deg
3341 GLO_LAT_23.00_0.00 OTF # el=13deg
3342 1923+210 Point # Col*=-5.0" NulE=-7.1" el=44deg
3343 GLO_LON_55.00_0.80 OTF # el=33deg
3344 GLO_LON_55.00_1.00 OTF # el=23deg
3345 NGC7027 POINT # Col*=-3.4" NulE=-6.2" el=53deg
3346 NGC7027 FOCUS # zlin=-2.2mm el=53deg
3347 NGC7027 POINT # Col*=-2.8" NulE=-5.8" el=53deg
3348 NGC7027 LPOINT # Col*=-2.8" NulE=-5.9" el=52deg
3349 W75NGAL Onoff # OK el=46deg
# Observations 05/09/2022; Gong
# start 05/09/2022,17:00 - end 06/09/2022,03:00
# firmware specpol: using automatic setup in obsinp (attenuation 0.5); delay -1, -2
# receiver loading: ok
# note: checked specpol on scan 3329 with toolbox2 adjust/adjfit
# for pointing/focus used FeBe S45mm-SPECPOL, BE Section 05 (BB-02 7000M FEED-01 X), 6600-6730 MHz
##########################
3491 3C286 POINT # Col*=-4.8" NulE=14.3" el=66deg; Large offset, check pointing
3492 3C286 POINT # Col*=-6.0" NulE=13.9" el=66deg; Pointing OK.
3493 3C286 FOCUS # zlin=-0.8mm el=66deg
3494 3C286 POINT # Col*=-4.5" NulE=13.3" el=66deg
3495 3C286 CalMAP # calmapv2_lat; el=64deg
3496 1923+210 Point # Col*=-1.7" NulE=6.4" el=30deg
3497 GLO_LON_57.00_0.60 OTF # el=30deg
3498 NRAO530 POINT # Col*=-6.6" NulE=2.4" el=15deg
3499-3500 canceled due to low elevations
3501 GLO_LON_11.00_0.85 OTF # el=15deg
3502 GLO_LON_9.00_0.15 OTF # el=13deg
3503 GLO_LON_9.00_0.25 OTF # el=14deg
3504 GLO_LON_9.00_0.35 OTF # el=15deg
3505 NRAO530 POINT # Col*=-12.5" NulE=-1.6" el=25deg
3506 NRAO530 FOCUS # zlin=-4.0mm el=25deg
3507 NRAO530 POINT # Col*=-12.5" NulE=-0.1" el=25deg
3508 GLO_LON_11.00_0.55 OTF # el=18deg
3509 GLO_LON_11.00_0.65 OTF # el=16deg
3510 GLO_LON_11.00_0.75 OTF # el=14deg
3511 GLO_LAT_17.20_0.00 OTF # el=13deg
3512 1923+210 Point # Col*=-3.5" NulE=-9.3" el=51deg
3513 GLO_LON_57.00_-0.20 OTF # el=45deg
3514 GLO_LON_57.00_-0.60 OTF # el=35deg
3515 NGC7027 POINT # Col*=-5.7" NulE=-2.0" el=62deg
3516 NGC7027 FOCUS # zlin=0.2mm el=62deg
3517 NGC7027 POINT # Col*=-9.6" NulE=-4.1" el=56deg
3518 W75NGAL Onoff # OK el=56deg
# Observations 06/09/2022; Gong
# start 06/09/2022,19:00 - end 06/09/2022,21:00
# firmware specpol: using automatic setup in obsinp (attenuation 0.5); delay 9, 22
# receiver loading: ok
# note: checked specpol on scan 3606 with toolbox2 adjust/adjfit
# for pointing/focus used FeBe S45mm-SPECPOL, BE Section 05 (BB-02 7000M FEED-01 X), 6600-6730 MHz
##########################
3604 3C286 POINT # Col*=-7.5" NulE=0.9" el=46deg;
3605 3C286 FOCUS # zlin=-2.7mm el=46deg
3606 3C286 POINT # Col*=-8.5" NulE=0.4" el=46deg
*3607 3C286 CalMAP # calmapv2; el=45deg; canceled due to the fitswriter issue; restart fitswriter
3608 3C286 POINT # Col*=-6.8" NulE=-0.1" el=42deg
3609 3C286 CalMAP # calmapv2; el=42deg;
3610 NRAO530 POINT # Col*=-7.8" NulE=-6.7" el=26deg
3611 GLO_LON_9.00_0.45 OTF # el=15deg
3612 GLO_LON_9.00_0.55 OTF # el=15deg bad quality due to the weather.
3613 GLO_LON_9.00_0.65 OTF # el=15deg canceled due to the thunderstorm
#### the following is carried out by the operator #########
3614 NGC7027 POINT # Col*=-0.5" NulE=-3.5" el=55deg
3615 NGC7027 FOCUS # zlin=-1.9mm el=55deg
3616 NGC7027 POINT # Col*=-2.6" NulE=-2.9" el=54deg
3617 W75NGAL Onoff # OK el=48deg
# Observations 07/09/2022; Gong
# start 07/09/2022,17:00 - end 08/09/2022,03:00
# firmware specpol: using automatic setup in obsinp (attenuation 0.5); delay 21, 22
# receiver loading: ok
# note: checked specpol on scan 3673 with toolbox2 adjust/adjfit
# for pointing/focus used FeBe S45mm-SPECPOL, BE Section 05 (BB-02 7000M FEED-01 X), 6600-6730 MHz
##########################
3671 3C286 POINT # Col*=0.1" NulE=1.7" el=67deg
3672 3C286 FOCUS # zlin=-0.8mm el=67deg
3673 3C286 POINT # Col*=-2.1" NulE=-1.8" el=67deg
3674 3C286 CalMAP # calmapv2_lat; el=65deg
3675 1741-038 Point # Col*=-1.4" NulE=-11.2" el=23deg
3676 GLO_LON_43.00_-0.40 OTF # el=22deg
3677 NRAO530 POINT # Col*=-9.6" NulE=1.1" el=14deg
3678 GLO_LAT_17.40_0.00 OTF # el=14deg
3679 GLO_LON_9.00_0.55 OTF # el=14deg
3680 GLO_LON_9.00_0.65 OTF # el=15deg
3681 GLO_LON_9.00_0.75 OTF # el=15deg
3682 NRAO530 POINT # Col*=-14.4" NulE=-4.0" el=24deg
3683 NRAO530 FOCUS # zlin=-3.5mm el=24deg
3684 NRAO530 POINT # Col*=-16.1" NulE=-3.4" el=14deg
3685 GLO_LON_9.00_0.85 OTF # el=14deg
3686 GLO_LAT_12.15_0.00 OTF # el=16deg
3687 GLO_LAT_17.60_0.00 OTF # el=13deg
3688 1923+210 Point # Col*=-6.0" NulE=-19.7" el=47deg
3689 GLO_LAT_57.60_0.00 OTF # el=46deg
3690 GLO_LON_57.00_0.40 OTF # el=36deg
3691 NGC7027 POINT # Col*=-7.6" NulE=-6.0" el=63deg
3692 NGC7027 FOCUS # zlin=-1.5mm el=63deg
3693 NGC7027 POINT # Col*=-7.6" NulE=-7.1" el=63deg
3694 NGC7027 LPOINT # Col*=-8.3" NulE=-5.5" el=62deg
3695 W75NGAL Onoff # OK el=57deg
# Observations 12/09/2022; Gong
# start 07/09/2022,17:00 - end 08/09/2022,03:00
# firmware specpol: using automatic setup in obsinp (attenuation 0.5); delay 19, -2
# receiver loading: ok
# note: checked specpol on scan 4093 with toolbox2 adjust/adjfit
# for pointing/focus used FeBe S45mm-SPECPOL, BE Section 05 (BB-02 7000M FEED-01 X), 6600-6730 MHz
##########################
4088 3C286 POINT # Col*=-0.5" NulE=-5.2" el=67deg
4089 3C286 FOCUS # zlin=-0.4mm el=66deg
4090 3C286 POINT # Col*=-0.2" NulE=-6.5" el=66deg; RFI
4091 3C286 LPOINT # Col*=-2.1" NulE=-6.8" el=66deg
4092 3C286 CalMAP # calmapv2; el=65deg
4093 3C286 POINT # Col*=-1.0" NulE=-4.7" el=64deg; OK
4094 1741-038 Point # Col*=-4.3" NulE=-7.8" el=25deg
4095 GLO_LON_41.00_0.40 OTF # el=25deg
4096 NRAO530 POINT # Col*=-7.0" NulE=-8.1" el=24deg
4097 GLO_LAT_12.25_0.00 OTF # el=16deg
4098 GLO_LAT_12.35_0.00 OTF # el=18deg
4099 GLO_LON_9.00_0.95 OTF # el=14deg
4100 GLO_LON_9.00_1.05 OTF # el=15deg
4101 NRAO530 POINT # Col*=-13.4" NulE=-9.8" el=24deg
4102 NRAO530 FOCUS # zlin=-3.9mm el=24deg
4103 NRAO530 POINT # Col*=-14.3" NulE=-7.4" el=14deg
4104 GLO_LAT_12.45_0.00 OTF # el=20deg
4105 GLO_LAT_12.55_0.00 OTF # el=18deg
4106 GLO_LAT_20.20_0.00 OTF # el=22deg
4107 GLO_LAT_20.40_0.00 OTF # el=16deg
4108 1923+210 Point # Col*=-6.9" NulE=-11.7" el=50deg
4109 GLO_LON_41.00_-0.40 OTF # el=27deg
4110 GLO_LON_57.00_-0.80 OTF # el=34deg
4111 NGC7027 POINT # Col*=-8.0" NulE=-4.6" el=61deg
4112 NGC7027 FOCUS # zlin=-1.5mm el=61deg
4113 NGC7027 POINT # Col*=-7.1" NulE=-4.9" el=61deg
4114 NGC7027 LPOINT # Col*=-7.5" NulE=-4.1" el=61deg
4115 W75NGAL Onoff # OK el=54deg
# Observations 16/09/2022; Gong
# start 16/09/2022,18:30 - end 17/09/2022,00:00
# firmware specpol: using automatic setup in obsinp (attenuation 0.5); delay 21, 22
# receiver loading: ok
# note: checked specpol on scan 4491 with toolbox2 adjust/adjfit
# for pointing/focus used FeBe S45mm-SPECPOL, BE Section 05 (BB-02 7000M FEED-01 X), 6600-6730 MHz
##########################
4485 3C286 POINT # Col*=2.8" NulE=6.9" el=49deg
4486 3C286 FOCUS # zlin=1.1mm el=48deg
4487 3C286 LPOINT # Col*=2.6" NulE=3.8" el=48deg
4488 3C286 CalMAP # calmapv2_lat; el=46deg; heavy rain; stopped after 15 minutes
4489 3C286 POINT # Col*=3.8" NulE=5.5" el=45deg; OK
4490 3C286 FOCUS # zlin=-3.2mm el=45deg
4491 3C286 LPOINT # Col*=4.3" NulE=5.6" el=45deg
4492 NRAO530 POINT # Col*=-0.5" NulE=0.8" el=20deg
4493 GLO_LAT_12.65_0.00 OTF # el=19deg
4494 GLO_LAT_12.75_0.00 OTF # el=20deg
4495 GLO_LAT_12.85_0.00 OTF # el=20deg
4496 GLO_LAT_12.95_0.00 OTF # el=20deg
4497 GLO_LAT_13.05_0.00 OTF # el=19deg
4498 NRAO530 POINT # Col*=5.2" NulE=-6.6" el=14deg
4499 GLO_LAT_17.80_0.00 OTF # el=14deg
4500 GLO_LON_23.00_1.00 OTF # el=13deg
4501 NGC7027 POINT # Col*=3.2" NulE=-3.9" el=74deg
4502 NGC7027 FOCUS # zlin=-2.2mm el=74deg
4503 NGC7027 POINT # Col*=4.1" NulE=0.5" el=67deg
4504 W75NGAL Onoff # OK el=67deg
# Observations 20/09/2022; Gong
# start 20/09/2022,21:00 - end 20/09/2022,23:00
# firmware specpol: using automatic setup in obsinp (attenuation 0.5); delay -3, -2
# receiver loading: ok
# note: checked specpol on scan 4951 with toolbox2 adjust/adjfit
# for pointing/focus used FeBe S45mm-SPECPOL, BE Section 05 (BB-02 7000M FEED-01 X), 6600-6730 MHz
##########################
4951 NGC7027 POINT # Col*=-1.5" NulE=3.1" el=74deg
4952 NGC7027 FOCUS # zlin=-2.7mm el=74deg
4953 NGC7027 POINT # Col*=0.8" NulE=5.8" el=74deg;
4954 NGC7027 LPOINT # Col*=0.0" NulE=5.6" el=66deg
4955 NRAO530 Point # Col*=5.4" NulE=-0.9" el=25deg
4956 GLO_LON_17.00_-1.00 OTF # el=25deg
# Observations 21/09/2022; Gong
# start 21/09/2022,17:00 - end 21/09/2022,23:00
# firmware specpol: using automatic setup in obsinp (attenuation 0.5); delay -3, -2
# receiver loading: ok
# note: checked specpol on scan 4093 with toolbox2 adjust/adjfit
# for pointing/focus used FeBe S45mm-SPECPOL, BE Section 05 (BB-02 7000M FEED-01 X), 6600-6730 MHz
# ** Wrong temperature humility display at the beginning **
# the operator resync the econders to restart it all again
##########################
4978 3C286 POINT # Col*=2.6" NulE=-12.5" el=57deg
4979 3C286 FOCUS # zlin=-1.4mm el=57deg
4980 3C286 POINT # Col*=2.9" NulE=-11.4" el=57deg;
4981 3C286 CalMap # el=56deg; Cal3C286v2
4982 NRAO530 Point # Col*=-2.5" NulE=-20.5" el=24deg
4983 GLO_LON_17.00_-0.80 OTF # el=16deg
4984 GLO_LAT_13.15_0.00 OTF # el=20deg
4985 GLO_LAT_13.25_0.00 OTF # el=20deg
4986 GLO_LAT_13.35_0.00 OTF # el=20deg
4987 NRAO530 Point # Col*=-2.5" NulE=-10.7" el=24deg
4988 NRAO530 FOCUS # zlin=-4.6mm el=24deg
4989 NRAO530 Point # Col*=-5.4" NulE=-10.2" el=24deg
4990 GLO_LAT_13.45_0.00 OTF # el=20deg
4991 NGC7027 POINT # Col*=0.8" NulE=-3.2" el=73deg
4992 NGC7027 FOCUS # zlin=-4.0mm el=73deg
4993 NGC7027 POINT # Col*=-0.5" NulE=-3.2" el=74deg
4994 NGC7027 LPOINT # Col*=-0.3" NulE=-2.6" el=78deg
4995 W75NGAL Onoff # OK
# Observations 21/09/2022; Gong
# start 21/09/2022,17:00 - end 21/09/2022,23:00
# firmware specpol: using automatic setup in obsinp (attenuation 0.5); delay -3, -2
# receiver loading: ok
# note: checked specpol on scan 4093 with toolbox2 adjust/adjfit
# for pointing/focus used FeBe S45mm-SPECPOL, BE Section 05 (BB-02 7000M FEED-01 X), 6600-6730 MHz
# ** Wrong temperature humility display at the beginning **
# the operator resync the econders to restart it all again
##########################
5137 3C286 POINT # Col*=7.6" NulE=2.5" el=39deg
5138 3C286 FOCUS # zlin=-1.9mm el=39deg
5139 3C286 POINT # Col*=2.5" NulE=3.2" el=39deg;
5140 3C286 CalMap # el=39deg; Cal3C286v2_lat
5141 NRAO530 Point # Col*=1.2" NulE=-1.6" el=26deg
5142 GLO_LAT_13.55_0.00 OTF # el=21deg
5143 GLO_LAT_13.65_0.00 OTF # el=20deg
5144 GLO_LAT_13.75_0.00 OTF # el=20deg
5145 GLO_LAT_13.85_0.00 OTF # el=17deg
5146 NRAO530 Point # Col*=3.6" NulE=-1.3" el=18deg
5147 GLO_LON_17.00_-0.60 OTF # el=15deg
5148 GLO_LAT_24.20_0.00 OTF # el=17deg
5149 NGC7027 LPOINT # Col*=-0.7" NulE=4.7" el=75deg
5150 W75NGAL Onoff # OK
# Observations 25/09/2022; Gong
# start 25/09/2022,17:00 - end 25/09/2022,23:00
# firmware specpol: using automatic setup in obsinp (attenuation 0.5); delay -3, 20
# receiver loading: ok
# note: checked specpol on scan 5231 with toolbox2 adjust/adjfit
# for pointing/focus used FeBe S45mm-SPECPOL, BE Section 05 (BB-02 7000M FEED-01 X), 6600-6730 MHz
# ** Wrong temperature humility display at the beginning **
# the operator resync the econders to restart it all again
##########################
5229 3C286 POINT # Col*=2.4" NulE=5.2" el=56deg
5230 3C286 FOCUS # zlin=0.2mm el=39deg
5231 3C286 POINT # Col*=3.3" NulE=6.3" el=55deg;
5232 3C286 CalMap # el=54deg; Cal3C286v2
5233 NRAO530 Point # Col*=4.1" NulE=4.4" el=24deg
5234 GLO_LON_17.00_-0.40 OTF # el=16deg
5235 GLO_LON_13.00_-1.05 OTF # el=19deg
5236 NRAO530 Point # Col*=1.9" NulE=-3.5" el=26deg
5237 NRAO530 Focus # zline=-3.6mm el=26deg
5238 NRAO530 Point # Col*=-1.4" NulE=-3.2" el=26deg
5239 GLO_LON_13.00_-0.95 OTF # el=20deg
5240 GLO_LON_13.00_-0.85 OTF # el=19deg
5241 GLO_LON_13.00_-0.75 OTF # el=17deg
5242 GLO_LON_13.00_-0.65 OTF # el=15deg
5243 NRAO530 Point # Col*=2.8" NulE=-15.2" el=16deg
5244 GLO_LON_17.00_-0.20 OTF # el=13deg
5245 NGC7027 LPOINT # Col*=2.5" NulE=-4.6" el=80deg
5246 NGC7027 LPOINT # Col*=4.2" NulE=-4.3" el=77deg
5247 W75NGAL Onoff # OK
# Observations 30/09/2022; Gong
# start 30/09/2022,17:00 - end 30/09/2022,23:00
# firmware specpol: using automatic setup in obsinp (attenuation 0.5); delay 21, 22
# receiver loading: ok
# note: checked specpol on scan 5231 with toolbox2 adjust/adjfit
# for pointing/focus used FeBe S45mm-SPECPOL, BE Section 05 (BB-02 7000M FEED-01 X), 6600-6730 MHz
# ** Wrong temperature humility display at the beginning **
# the operator resync the econders to restart it all again
##########################
5771 3C286 POINT # Col*=7.1" NulE=-1.5" el=54deg
5772 3C286 FOCUS # zlin=-0.4mm el=54deg
5773 3C286 POINT # Col*=3.5" NulE=0.7" el=53deg;
5774 3C286 CalMap # el=51deg; Cal3C286v2_lat
5775 NRAO530 Point # Col*=-3.2" NulE=-5.8" el=25deg
5776 GLO_LON_17.00_-0.00 OTF # el=17deg
5777 GLO_LON_13.00_-0.55 OTF # el=20deg
5778 GLO_LON_13.00_-0.45 OTF # el=20deg
5779 NRAO530 Point # Col*=-0.7" NulE=-4.9" el=24deg
5780 NRAO530 Focus # zline=-3.4mm el=24deg
5781 NRAO530 Point # Col*=-3.6" NulE=-3.0" el=24deg
5782 GLO_LON_13.00_-0.35 OTF # el=18deg
5783 GLO_LON_13.00_-0.25 OTF # el=17deg
5784 GLO_LON_17.00_0.20 OTF # el=15deg
5785 GLO_LON_23.00_0.80 OTF # el=15deg
5786 NGC7027 POINT # Col*=-3.4" NulE=-0.7" el=76deg
5787 NGC7027 focus # z=-1.7mm el=76deg
5788 NGC7027 POINT # Col*=-4.1" NulE=1.7" el=76deg
5789 NGC7027 LPOINT # Col*=-2.4" NulE=3.7" el=75deg
5790 W75NGAL Onoff # OK
5791 1923+210 POINT # Col*=-0.2" NulE=0.8" el=44deg
5792 GLO_LON_57.00_0.20 OTF # el=36deg