In [ ]:
# Observations 10/01/2022; Gong
# start 01/10/2022,19:00 - end 10/01/2022,23:00  
# firmware specpol: using automatic setup in obsinp (attenuation 0.5); delay -3, -2
# receiver loading: ok
# note: checked specpol on scan 5231  with toolbox2 adjust/adjfit
# for pointing/focus used FeBe S45mm-SPECPOL, BE Section 05 (BB-02 7000M FEED-01 X), 6600-6730 MHz
#  ** Wrong temperature humility display at the beginning ** 
#  the operator resync the econders to restart it all again
##########################
5892    3C286                 POINT    # Col*=11.0" NulE=-2.6" el=32deg
5893    3C286                 FOCUS    # zlin=-2.3mm  el=32deg
5894    3C286                 POINT    # Col*=7.7" NulE=-2.1" el=32deg;
5895    3C286                 CalMap   # el=30deg; Cal3C286v2
5896    NRAO530               Point    # Col*=1.0" NulE=0.4" el=24deg
5897    GLO_LON_13.00_-0.15   OTF      # el=19deg
5898    GLO_LON_13.00_-0.05   OTF      # el=17deg
5899    GLO_LON_13.00_0.05    OTF      # el=15deg
5900    GLO_LON_17.00_0.40    OTF      # el=12deg 
5901    NGC7027               POINT    # Col*=5.0" NulE=2.0" el=80deg
5902    NGC7027               focus    # z=-2.0mm el=80deg
5903    NGC7027               POINT    # Col*=4.3" NulE=4.1" el=80deg
5904    NGC7027               LPOINT   # Col*=5.1" NulE=3.0" el=80deg
5905    W75NGAL               Onoff    # OK
In [ ]:
# Observations 10/03/2022; Gong
# start 01/10/2022,17:00 - end 10/01/2022,23:00  
# firmware specpol: using automatic setup in obsinp (attenuation 0.5); delay -3, 22
# receiver loading: ok
# note: checked specpol on scan 6272  with toolbox2 adjust/adjfit
# for pointing/focus used FeBe S45mm-SPECPOL, BE Section 05 (BB-02 7000M FEED-01 X), 6600-6730 MHz
#  ** Wrong temperature humility display at the beginning ** 
#  the operator resync the econders to restart it all again
##########################
6270    3C286                 POINT    # Col*=3.7" NulE=7.8" el=51deg
6271    3C286                 FOCUS    # zlin=-1.2mm  el=51deg
6272    3C286                 POINT    # Col*=0.3" NulE=6.2" el=51deg;
6273    3C286                 CalMap   # el=48deg; Cal3C286v2_lat
6274    NRAO530               Point    # Col*=-2.9" NulE=0.8" el=25deg
6275    GLO_LON_13.00_0.15    OTF      # el=19deg
6276    GLO_LON_13.00_0.25    OTF      # el=20deg
6277    GLO_LON_13.00_0.35    OTF      # el=20deg
6278    NRAO530               Point    # Col*=-0.4" NulE=0.8" el=24deg
6279    NRAO530               Focus    # z=-3.8mm el=24deg
6280    NRAO530               Point    # Col*=-3.3" NulE=-2.9" el=19deg
6281    GLO_LON_13.00_0.45    OTF      # el=19deg
6282    GLO_LON_13.00_0.55    OTF      # el=17deg
6283    GLO_LON_13.00_0.55    OTF      # el=15deg
6284    GLO_LON_17.00_1.00    OTF      # el=13deg 
6285    1923+210              Point    # Col*=1.1" NulE=-10.0" el=52deg
6286    GLO_LAT_57.00_0.00    OTF      # el=46deg 
6287    NGC7027               POINT    # Col*=0.5" NulE=0.7" el=73deg
6288    NGC7027               focus    # z=-2.7mm el=72deg
6289    NGC7027               POINT    # Col*=1.4" NulE=1.4" el=72deg
6290    NGC7027               LPOINT   # Col*=1.9" NulE=1.6" el=72deg
6291    W75NGAL               Onoff    # OK
In [ ]:
# Observations 05/10/2022; Gong
# start 05/10/2022,17:00 - end 05/10/2022,23:00  
# firmware specpol: using automatic setup in obsinp (attenuation 0.5); delay -3, -2
# receiver loading: ok
# note: checked specpol on scan 6527  with toolbox2 adjust/adjfit
# for pointing/focus used FeBe S45mm-SPECPOL, BE Section 05 (BB-02 7000M FEED-01 X), 6600-6730 MHz
##########################
6525    3C286                  POINT    # Col*=4.1" NulE=7.4" el=39deg
6526    3C286                  FOCUS    # zlin=-1.2mm  el=39deg
6527    3C286                  LPOINT   # Col*=1.4" NulE=6.5" el=38deg
6528    3C286                  CalMAP   # calmapv2_lat; el=37deg; 
6529    NRAO530                POINT    # Col*=-0.5" NulE=-3.1" el=25deg
6530    GLO_LON_13.00_0.75     OTF      # el=20deg
6531    GLO_LON_13.00_0.85     OTF      # el=19deg
6532    GLO_LON_13.00_0.95     OTF      # el=18deg
6533    GLO_LON_13.00_1.05     OTF      # el=15deg
6534    GLO_LON_17.00_0.60     OTF      # el=13deg
6535    1741-038               POINT    # Col*=5.4" NulE=-13.2" el=18deg
6536    GLO_LAT_23.80_0.00     OTF      # el=14deg
6537    NGC7027                POINT    # Col*=-3.4" NulE=4.3" el=74deg
6538    NGC7027                FOCUS    # zlin=-1.5mm  el=73deg
6539    NGC7027                POINT    # Col*=-2.0" NulE=5.6" el=72deg
6540    NGC7027                LPOINT   # Col*=-2.0" NulE=5.6" el=72deg ; scan length too short; the results are not applied.
6541    NGC7027                LPOINT   # Col*=-1.2" NulE=5.1" el=67deg
6542    W75NGAL                Onoff    # OK el=67deg
In [ ]:
# Observations 20/10/2022; Gong
# start 20/10/2022,17:00 - end 20/10/2022,20:00  
# firmware specpol: using automatic setup in obsinp (attenuation 0.5); delay -3, -2
# receiver loading: ok
# note: checked specpol on scan 8337  with toolbox2 adjust/adjfit
# for pointing/focus used FeBe S45mm-SPECPOL, BE Section 05 (BB-02 7000M FEED-01 X), 6600-6730 MHz
##########################
8335    3C286                  POINT    # Col*=6.7" NulE=2.9" el=39deg
8336    3C286                  FOCUS    # zlin=-1.6mm  el=39deg
8337    3C286                  POINT    # Col*=3.2" NulE=2.5" el=37deg
8338    3C286                  CalMAP   # calmapv2; el=37deg; 
8339    NRAO530                POINT    # Col*=-1.6" NulE=-3.8" el=25deg
6340    GLO_LON_13.00_0.45     OTF      # el=20deg
6341    GLO_LON_17.00_0.80     OTF      # el=21deg
6342    1749+096               POINT    # Col*=-2.5" NulE=-3.9" el=42deg
6343    G36                    Onoff    # el=40deg
6344    G36                    OnOff    # el=39deg
6345    G36                    Onoff    # el=39deg