# Observations 16/11/2022; Gong
# start 16/10/2022,16:00 - end 16/11/2022,20:00
# firmware specpol: using automatic setup in obsinp (attenuation 0.5); delay -3, -2
# receiver loading: ok
# note: checked specpol on scan 8337 with toolbox2 adjust/adjfit
# for pointing/focus used FeBe S45mm-SPECPOL, BE Section 05 (BB-02 7000M FEED-01 X), 6600-6730 MHz
##########################
121 3C286 POINT # Col*=5.3" NulE=-3.1" el=25deg
122 3C286 FOCUS # zlin=-3.0mm el=24deg
123 3C286 POINT # Col*=7.4" NulE=-3.3" el=24deg
124 3C286 CalMAP # calmapv2_lat; el=22deg;
125 3C286 LPOINT # Col*=11.8" NulE=-4.3" el=22deg
126 1741-038 Pointing # Col*=-1.7" NulE=-2.2" el=30deg
127 GLO_LAT_24.60_0.00 OTF # el=25deg
128 GLO_LAT_24.80_0.00 OTF # el=20deg
129 GLO_LAT_25.40_0.00 OTF # el=12deg
130 NGC7027 Pointing # Col*=-1.5" NulE=5.0" el=66deg
131 W75NGAL OnOff # el=39deg
132 1923+210 Pointing # Col*=4.5" NulE=6.5" el=26deg
133 G44.31+0.03 OnOff # el=27deg
# Observations 22/11/2022; Gong
# start 22/11/2022,17:00 - end 22/11/2022,21:00
# firmware specpol: using automatic setup in obsinp (attenuation 0.5); delay 21, 22
# receiver loading: ok
# note: checked specpol on scan 4491 with toolbox2 adjust/adjfit
# for pointing/focus used FeBe S45mm-SPECPOL, BE Section 05 (BB-02 7000M FEED-01 X), 6600-6730 MHz
############################ 3C286 is already invisible ###############
775 NGC7027 POINT # Col*=5.8" NulE=8.2" el=78deg
776 NGC7027 FOCUS # zlin=-2.0mm el=78deg
777 NGC7027 POINT # Col*=6.6" NulE=10.5" el=79deg
778 NGC7027 LPOINT # Col*=4.5" NulE=8.2" el=79deg
779 1741-038 POINT # Col*=6.5" NulE=0.6" el=24deg
780 GLO_LON_25.00_-1.00 OTF # el=19deg
781 GLO_LON_25.00_1.00 OTF # el=11deg
782 1923+210 POINT # Col*=3.3" NulE=2.1" el=41deg
783 GLO_LAT_46.00_0.00 OTF # el = 22deg
784 GLO_LAT_54.00_0.00 OTF # el = 21deg
# Observations 24/11/2022; Gong
# start 24/11/2022,18:00 - end 22/11/2022,21:00
# firmware specpol: using automatic setup in obsinp (attenuation 0.5); delay 21, -2
# receiver loading: ok
# note: checked specpol on scan 4491 with toolbox2 adjust/adjfit
# for pointing/focus used FeBe S45mm-SPECPOL, BE Section 05 (BB-02 7000M FEED-01 X), 6600-6730 MHz
############################ 3C286 is already invisible ###############
1010 NGC7027 POINT # Col*=-1.8" NulE=14.1" el=76deg
1011 NGC7027 FOCUS # zlin=-2.9mm el=76deg
1012 NGC7027 POINT # Col*=-0.3" NulE=15.1" el=76deg
1013 1741-038 POINT # Col*=1.3" NulE=4.1" el=27deg
1014 GLO_LON_25.00_-0.60 OTF # el=22deg
1015 GLO_LON_25.00_-0.40 OTF # el=15deg
1016 GLO_LON_25.00_-0.20 OTF # el=8deg ; abort due to the low elevation
# Observations 26/11/2022; Gong
# start 26/11/2022,15:00 - end 26/11/2022,18:00
# firmware specpol: using automatic setup in obsinp (attenuation 0.5); delay 21, 22
# receiver loading: ok
# note: checked specpol on scan 4491 with toolbox2 adjust/adjfit
# for pointing/focus used FeBe S45mm-SPECPOL, BE Section 05 (BB-02 7000M FEED-01 X), 6600-6730 MHz
############################ 3C286 is already invisible ###############
1342 NGC7027 POINT # Col*=1.3" NulE=0.2" el=68deg
1343 NGC7027 FOCUS # zlin=-1.2mm el=68deg
1344 NGC7027 POINT # Col*=3.4" NulE=0.1" el=68deg
1345 NGC7027 LPOINT # Col*=2.0" NulE=2.6" el=68deg
1346 1741-038 POINT # Col*=2.2" NulE=5.7" el=31deg
1347 GLO_LON_25.00_-0.60 OTF # el=22deg
1348 GLO_LON_25.00_-0.40 OTF # el=15deg
1349 GLO_LON_25.00_-0.20 OTF # el=8deg